|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STY80NM60N N-channel 600 V - 0.035 - 80 A - Max247 second generation MDmeshTM Power MOSFET Preliminary Data Features www..com Type VDSS 600 V RDS(on) < 0.040 ID 80 A Pw 560 W STY80NM60N 100% avalanche tested Low input capacitance and gate charge Low gate input resistance Max247 1 2 3 Application Switching applications Description This series of devices implements second generation MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the Company's strip layout to yield one of the world's lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters. Figure 1. Internal schematic diagram Table 1. Device summary Marking 80NM60N Package Max247 Packaging Tube Order code STY80NM60N December 2007 Rev 2 1/9 www.st.com 9 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. Electrical ratings STY80NM60N 1 Electrical ratings Table 2. Symbol VDS VGS ID Absolute maximum ratings Parameter Drain-source voltage (VGS = 0) Gate- source voltage Drain current (continuous) at TC = 25 C Drain current (continuous) at TC = 100 C Drain current (pulsed) Total dissipation at TC = 25 C Derating factor Value 600 25 80 50.4 320 560 4.48 15 -55 to 150 150 Unit V V A A A W W/C V/ns C C www..com ID IDM (1) PTOT dv/dt (2) Tstg Tj Peak diode recovery voltage slope Storage temperature Max. operating junction temperature 1. Pulse width limited by safe operating area 2. ISD 80A, di/dt 400 A/s, VDD =80% V(BR)DSS Table 3. Symbol Rthj-case Rthj-amb Tl Thermal data Parameter Thermal resistance junction-case max Thermal resistance junction-ambient max Maximum lead temperature for soldering purpose Value 0.22 30 300 Unit C/W C/W C Table 4. Symbol IAS EAS Avalanche characteristics Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) Single pulse avalanche energy (starting Tj=25C, Id=Ias, Vdd=50 V) Value Tbd Tbd Unit A mJ 2/9 STY80NM60N Electrical characteristics 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 5. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown voltage Drain source voltage slope Zero gate voltage drain current (VGS = 0) Gate-body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 1 mA, VGS = 0 Vdd = 480 V, Id = 80 A, Vgs = 10 V VDS = Max rating VDS = Max rating, @125 C VGS = 20 V VDS = VGS, ID = 250 A VGS = 10 V, ID = 40 A 2 3 0.035 Min. 600 Tbd 1 10 100 4 0.04 Typ. Max. Unit V V/ns A A nA V www..com dv/dt (1) IDSS IGSS VGS(th) RDS(on) 1. Characteristic value at turn off on inductive load Table 6. Symbol gfs (1) Ciss Coss Crss Coss eq. (2) Qg Qgs Qgd Rg Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Total gate charge Gate-source charge Gate-drain charge Gate input resistance Test conditions VDS=15 V, ID =40 A VDS = 50 V, f = 1 MHz, VGS = 0 Min. Typ. Tbd Tbd Tbd Tbd Tbd Tbd Tbd Tbd Tbd Max. Unit S pF pF pF VGS = 0 V, VDS = 0 V to 480 V VDD = 480 V, ID = 80 A, VGS = 10 V, (see Figure 3) f=1MHz Gate DC Bias=0 Test signal level = 20 mV open drain pF nC nC nC 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDS 3/9 Electrical characteristics STY80NM60N Table 7. Symbol td(on) tr td(off) tf Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD = 300 V, ID = 40A RG = 4.7 VGS = 10 V (see Figure 2) Min. Typ. Tbd Tbd Tbd Tbd Max. Unit ns ns ns ns Table 8. www..com Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 80 A, VGS = 0 ISD = 80 A, di/dt = 100 A/s VDD = 100 V, Tj = 25 C (see Figure 4) ISD = 80 A, di/dt = 100 A/s VDD = 100 V, Tj = 150 C (see Figure 4) Tbd Tbd Tbd Tbd Tbd Tbd Test conditions Min Typ. Max 80 320 1.5 Unit A A V ns C A ns C A Symbol ISD ISDM (1) VSD (2) trr Qrr IRRM trr Qrr IRRM 1. Pulse width limited by safe operating area 2. Pulsed: Pulse duration = 300 s, duty cycle 1.5% 4/9 STY80NM60N Test circuit 3 Figure 2. Test circuit Switching times test circuit for resistive load Figure 3. Gate charge test circuit www..com Figure 4. Test circuit for inductive load Figure 5. switching and diode recovery times Unclamped Inductive load test circuit Figure 6. Unclamped inductive waveform Figure 7. Switching time waveform 5/9 Package mechanical data STY80NM60N 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com www..com 6/9 STY80NM60N Package mechanical data Max247 MECHANICAL DATA mm MIN. TYP. MAX. 5.30 2.60 1.40 2.40 3.40 0.80 20.30 5.55 15.90 15.20 4.30 MIN. inch TYP. MAX. DIM. www..com A A1 b b1 b2 c D e E L L1 4.70 2.20 1.00 2.00 3.00 0.40 19.70 5.35 15.30 14.20 3.70 P025Q 7/9 Revision history STY80NM60N 5 Revision history Table 9. Date 29-Nov-2007 04-Dec-2007 Document revision history Revision 1 2 First release Header has been corrected Changes www..com 8/9 STY80NM60N www..com Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9 |
Price & Availability of STY80NM60N |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |